Personal tools
You are here: Home gvSIG Projects gvSIG Desktop Documentation User documentation gvSIG-Desktop 1.9. User manual Manual de usuario gvSIG 1.9
gvSIG Desktop
gvSIG Desktop

Cached time 11/22/13 04:24:37 Clear cache and reload

 
Document Actions

Manual de usuario gvSIG 1.9

by Grupo gvSIG last modified 2011-04-19 16:42

When you load a file that is not georeferenced, gvSIG can prompt you to enter the coordinates manually. For this the option has to be activated in preferences, which is disabled by default. The option that needs to be activated is "Pedir las coordenadas al cargar un raster que no tiene georreferenciación".

georreferenciacion.img/es/PreferenciasModificargeorreferenciacioncargacapa

Raster Preferences. Pedir las coordenadas al cargar un raster que no tiene georreferenciación

In this case we will see a dialog with the message: "Name of layer. The layer has no georeferencing. Do you want to enter them manually?". If you answered "No", the load is carried out with the coordinates (0, 0) in the top left corner (width in pixels, height in pixels) in the lower right corner. If the answer is "Yes", then a dialog to enter the coordinates of the raster will show. In this one must be careful to enter valid data to avoid erroneous results. The dialog has two tabs from which we can enter the coordinates in the form of affine transformation or the upper-left and bottom-right corners. In the first mode will need the X and Y coordinates of the upper right corner of the original raster, the pixel size in X, the pixel size on Y, X rotation and the rotation Y.

georreferenciacion.img/es/modifTransformacionRaster.png

Loading raster without georeference. Transformation

In the second mode we only introduce the coordinates of the corners in the order indicated by the graphs.

georreferenciacion.img/es/modifEsquinasRaster.png

Loading raster without georeference. Corners

Get freemind document

View source document Get permanent link


Powered by Plone CMS, the Open Source Content Management System

This site conforms to the following standards: